User’s Manual
18
Lattice screen config
Figure 4-10
Select
Lattice Screen State
. You can select from
Car Pass State
and
Normal State
.
Step 2
The information displayed on the screen may vary in different states.
Select the display mode from
Type One:2*2
,
Type Two:2*1
, and
Type Three:4*1
. For
Step 3
example, if you select
Type Three:4*1
, it means an information display area consists of
4 small matrixes from 1 line.
Set parameters applicable to the entire LED display.
Step 4
Roll Speed Level
: The displaying speed of information on the screen. Five levels
are available.
Status Change Time
: The time of vehicle pass information displayed on the
screen. You can select from
10
,
20
,
30
,
40
,
50
, and
60
seconds.
Double-screen any screen to set its display parameters separately.
Step 5
Display Color
: The color of displayed information. It is
Red
by default.
Display Mode
: The way that information displayed on the screen.
Redraw the screen as needed.
Step 6
1) Click
Redraw
, and the matrixes are displayed in blue, which means no information
display area is drawn.
Redraw the screen
Figure 4-11
