User’s Manual
17
Recognition
Figure 4-9
Configure recognition area.
Step 4
The config example on the right of video image can be used as a reference.
1) Click
Iden Area
.
Click and draw 4 lines on the video image and the recognition area is formed.
2) Click
Snap Line
.
Draw snap line via dragging mouse on the area. The snap line must cross the
area.
3) Click
Save
to complete the settings.
Click
Finish
, exit guide interface and enter
Live
interface.
Step 5
Lattice Screen
4.4
Lattice screen displays different information when vehicle passes and in normal state. The Kit
also broadcast screen information according to the broadcast content settings.
4.4.1 Lattice Screen Config
You can configure the information displayed on the screen in
Car Pass State
and
Normal
State
.
Select
Setup > ITC > Lattice Screen Config
.
Step 1
