User’s Manual
16
Confirm information of
Software Version
, and then click
OK
.
Step 2
Plate pixel
Figure 4-7
You can check whether the video image is properly zoomed and focused by checking
Step 3
the plate pixel.
1) Drag zoom and focus bar to adjust the video image properly.
2) When the vehicle plate comes into the green line area, click
Snapshot
to take a
snapshot of the plate.
Snapshot
becomes
Resume
.
3) Drag the yellow plate pixel box to the position of the plate.
4) Click
Zoom
.
Zoom in the picture selected by the plate pixel box. It can realize 2x or 4x zoom
rate.
5) Adjust the position of plate pixel box and make it the optimal plate size.
6) Click
Check Pixel
.
Check plate
Figure 4-8
7) Click
Yes
and plate pixel config is finished.
