Deployment Manual
56
6.3.7 Configuring Temperature and Mask Alarms
Configure temperature and mask alarms. Otherwise you cannot receive the alarms on Express.
Step 1 On the
Homepage
of Express, click
Config
.
Step 2 Select the Door channel under the face recognition terminal, and then click
Event
Configuration
.
Step 3 Click
A & C Alarm
, click
High Temperature Abnormal Alarm
or
Not mask alarm
, and
then click
to enable it.
indicates that the alarm is enabled.
Step 4 Set alarm priority, and then select a template. The alarm is received and reported
during the period of the template.
Figure 6-33 Set alarms
Step 5 Set linked actions.
Click
Link Video
, select the face recognition terminal from the device list, and then
select the check boxes next to
After alarm is triggered, camera snapshot
and
When alarm is triggered, open camera on client
.
Click
, and then set email parameters.
Step 6 Click
OK
.
