Deployment Manual
46
Figure 6-20 Add Device
Step 6 Enter login username and password, and then click
OK
.
6.3.2.2 Adding Manually
Select this method when you add a single device, or the username and password of the
devices are different, or the added device is not in the same segment.
Step 1 Click
Device
on the client homepage.
Step 2 Click
Add
.
Step 3 Set parameters.
The item with
*
is required to be filled in. You need to set different parameters if
different device are connected.
Add encoder, set correct parameters, and click
to view device video.
Table 6-5 Parameter description
Parameter
Description
Device
Category
Select
Access Control
.
Register Mode
Support registration by following method:
IP address
Add device to platform by adding device IP.
Serial number (Device with P2P function)
If device supports P2P function, then you can add device to platform
by adding device serial number.
ONVIF
If device enables ONVIF protocol, then you can add device to
platform by ONVIF protocol. Generally it can be used when adding
third-party device.
