Deployment Manual
34
Temperature
Monitoring
Tap the
that corresponds to
Temperature Monitoring
,
and then set the following parameters.
Temp Unit: Select a temperature unit between °C and °F.
Temp Rect: Set whether to display the temperature monitoring
box or not.
Temp Monitoring Distance (cm): The value is 0 by default. Set
other values to enable temperature monitoring within a defined
distance. 80 cm is recommended.
Temp Threshold (°C): Set the temperature threshold. The
monitored body temperature will be judged as high
temperature if it is greater than or equal to the set value.
Temp Correction Value: This parameter is for testing. The
difference of the temperature monitoring environment might
cause the temperature deviation between the monitored
temperature and the actual temperature. You can select
multiple monitored samples for testing. According to the
comparison between the monitored temperature and the
actual temperature, you can correct the temperature deviation
by this parameter. For example, if the monitored temperature
is 0.5°C lower than the actual temperature, the correction
value is set to 0.5°C; if the measured temperature is 0.5°C
higher than the actual temperature, the correction value is set
to -0.5°C.
Only the terminal with a temperature monitoring unit supports this
parameter.
Mask Mode
Tap
Mask Mode
, and then select
Mask reminder
or
Mask
intercept
.
Mask reminder: Mask is detected during face recognition. If the
person is detected not wearing a mask, the system will prompt
mask reminder and passage is allowed.
Mask intercept: Mask is detected during face recognition. If the
person is detected not wearing a mask, the system will prompt
mask reminder and passage is not allowed.
Step 4 Tap
.
