Dahua DHI-ASC1204C, Руководство пользователя

Страница: 20 / 35

Installation Guide 10
Alarm Type Alarm Signal Input
Port
Alarm Signal Output
Port
Alarm Status
alarm input SR2 and reader tamper alarm
trigger external alarm to give
an alarm.
SR3
SR4
RS-485/CASE
RS-485/CASE
RS-485/CASE
RS-485/CASE
DIP Switch 2.4
Operate with DIP switch.
Figure 2-12

the switch is at ON position, meaning 1.
 the switch is at the bottom, meaning 0.

1
～
8 are all 0; the system is started normally.
 1
～
8 are all 1; the system enters BOOT mode after start.
 1, 3, 5 and 7 are 1, while others are 0. After restart, the system restores factory defaults.

2, 4, 6 and 8 are 1, while others are 0. After restart, the system restores factory defaults,
but user info is retained.
Restart 2.5
Press restart button (as shown in Figure 2-4 to restart the device.
Restart button is to restart the device, rather than modifying configuration.