5.2.2
Set Connection Parameter
5.2.2.1
Set Connection Port Parameter
You can set the max number of ports which can be connected to device and each port value.
Step 1
Select "Setup > Network > Connection > Connection" and the system will display the interface of
"Connection", which is shown in Figure 5-26.
Figure 5-26
Step 2
It is to set connection parameters, please refer to Table 5-15 for more details.
Note
It needs to reboot the device and make it valid when modifying other parameter setting except max
connection.
0
～
1024, 37780
～
37880, 1900, 3800, 5000, 5050, 9999, 37776, 39999 and 42323 have been used
as special ports, which are not allowed to be set by users.
It is not recommended to use the default value of other ports when setting ports.
Parameter Function
Max
Connection
It is the number of clients which are allowed to be logged in by device at the
same time (such as WEB client, platform client, mobile client and so on), it is 10
by default.
TCP Port
It is the port which provides service for TCP protocol communication, it is 37777
by default.
UDP Port
User data package protocol port, it is 37778 by default.
