5.1.2.1
Set Video
It is to set the video stream parameters of tracking speed dome and panorama camera, which includes
stream type, encode mode, resolution, frame rate, bit rate type, bit rate, I frame interval, SVC and
watermark setting etc.
Step 1
Select "Setup > Camera > Video > Video" and the system will display the interface of "Video", which is
shown in Figure 5-13.
Figure 5-13
Step 2
Select channel.
When the "Channel" is set as "1", it is to set the video stream parameters of tracking speed dome.
When the "Channel" is set as "2" or "3", it is to set the video stream parameters of panorama
camera.
Step 3
It is to set video stream, please refer to Table 5-9 for more details.
Parameter
Function
Enable
Select "Enable" to enable sub stream, it is enable by
default.
The device supports sub stream 1 and sub stream 2 at
the same time.
