Parameter
Note
Date Format It is the date format displayed by the system.
Time Format
It is the time format displayed by the system, including 24-hour system and
12-hour system.
Time Zone
It is the time zone where the device is located.
Current
Time
It the current system time of the device.
Click "Sync PC" and it will adjust system time on the basis of PC time.
DST Enable
It needs to enable DST when the place where the device is located
implements DST.
It will enable DST when selecting "DST". It can set start time and end time
of DST according to week or date.
Synchronize
with NTP
It needs to enable NTP function when the device needs to synchronize with
the NTP server.
It enables NTP function when selecting "Synchronize with NTP".
NTP Server
It is the IP address or domain name of NTP server.
Port
It is the port number of NTP server.
Update
Period
It is the period of synchronizing time between device and NTP server.
Table 5-50
Step 3
Click "Save" to complete setting.
5.6.1.3
Splicing
It is to splice the image of corresponding lens for panorama camera.
Step 1
Select "Setup > System > General > Splicing" and the system will display the interface of "Splicing",
which is shown in Figure 5-96.
Figure 5-96
Step 2
Select the camera which needs to be spliced.
