Table 3-10 Description of advanced parameters
Parameter
Description
Signals
●
Default Startup Channel: Select the channel to be enabled at
startup.
●
Default Apps: Select an application that is on the device to be
opened every time the system starts.
●
Signal Detected:
Auto Redirect : Connect to the signal source and
automatically redirect to the corresponding channel.
Pop-up Window : When a signal source is connected, a
pop-up window appears asking whether to jump to the
connected source channel.
●
Customize Channel Name : Customize the channel name.
After the name is modified, the corresponding channel name
of the whole system will be modified synchronously.
Device Management
●
View information on the camera, microphone, and speaker.
You can import firmware package to update the camera or
recalibrate the postilion of the camera.
●
HDMI OUT : The function is available after the device is
connected to a monitor through the HDMI OUT port. After you
enable HDMI OUT, the device outputs signals at the
maximum resolution of the monitor by default. You can select
different resolutions depending on the capacity of the
monitor.
●
RS-232 Control : With RS-232 Control enabled, you can
connect the device to the RS-232 transparent debugging
serial port for data transmission between devices.
Accessibility
●
Non-contact Control : Use gestures to turn screens and take
screenshots.
●
Target Recognition : Recognizes target.
Person Unlock : Applies to screen lock and touch lock. After
you enable the function, a registered person can unlock the
device and an unregistered person can wake up the screen.
Non-contact control and target recognition cannot be enabled at
the same time.
User's Manual
32
