Web Configuration 72
6.5.2.1 Attributes
6.5.2.1.1 General
You can configure the brightness, contrast, hue, saturation, mode, etc. of snapshots.
Select
Setting > Camera > Attributes > General
.
Step 1
The
General
interface is displayed. See Figure 6-82.
General
Figure 6-82
Configure the parameters. See Table 6-23.
Step 2
Table 6-23 General parameters
Parameter Description
Brightness
You can adjust the overall image brightness. Change the value when the image
is too bright or too dark.
Both the darker area and the brighter area will have same changes when
adjusting the brightness. The image may become blurry when the value gets
bigger. The recommended range is 40
–60, and the available range is 0–100.
The value is 50 by default. The larger the value, the brighter the image.
Contrast
You can adjust the contrast when the image brightness is proper but contrast is
not enough.
The larger the value, the darker the dark area, and the more exposed the
bright area.
The image may become blurry when the value gets smaller. The
recommended range is 40
–60, and the available range is 0–100.
The value is 50 by default. The larger the value, the bigger the contrast.
Hue
You can adjust the hue. For example, change red into blue.
The default value is made by light sensor and is recommended. The
recommended range is 40
–60, and the available range is 0–100.
The value is 50 by default. The hue value does not change the overall
image brightness.
