Web Configuration 54
Parameter
Description
Left Top
Configure the X and Y coordinates of light group.
Right Bottom
Proceeding
through
Red On: Detect running a red light on the basis that the red light is on.
For example: When crossing an intersection, a vehicle goes straight on red
will be detected as running a red light.
Green Off: Detect running a red light on the basis that the green light is
off.
For example: When crossing an intersection, a vehicle goes straight when
the green light is off will be detected as running a red light.
It is available only when
Swing Detect
is selected as the
Light Group
Signal
.
Light Group
Signal
External Signal: Signals from a signal detector connected to traffic light.
Swing Detect: When the position of traffic light changes slightly, the
video detection area will be enlarged.
Light Group
Number
You can configure the number according to the actual condition of traffic
lights.
Type
Red, yellow, green, and countdown lights are available.
Direction
The direction indicated by the light.
Yellow time
The time (ms) the yellow light lasts.
Click
Yes
to save the configuration.
Step 8
Click
OK
to save the configuration of Light Group interface. Click
Refresh
to refersh the
Step 9
interface.
6.5.1.4.7 Video Analyse
–Recognition
It is to recognize the vehicle according to the vehicle plate, series, sign, type, etc.
Select
Setting > ITC > Intelligent > Video Analyse > Recognition
.
Step 1
The
Recognition
interface is displayed. See Figure 6-57 and Figure 6-57.
Different models with different work modes may support different intelligent functions, and the
actual product shall prevail.
