Dahlert DT-WP-20, Инструкция по эксплуатации, Страница: 8 / 12

6
2. As shown in the figure below
1. Follow the steps below to replace the filter.
Remove the water tank Open the top cover Open the filter handle
Lift up the old filter Put in the new filter and lock it
by pressing the press rod until
hearing “tick” sound
Install the top cover and put the
water tank in place
2. After replacing the filter, hold the [ambient temperature water] button for 3 seconds to reset
the filter life.
Ambient temperature
water
3 seconds
4. Cleaning and Maintenance
Daily Maintenance
Note
Do not flush with splashing water when cleaning it, so as not to affect the electric insulation
performance. Do not clean the machine with hard brush, wire rope brush, or organic solvent such
as cleaning powder, hot water or strong acid, strong alkali and so on.
1. Remove the water receiver and drain the
residual water in the water receiver.
2. Soak the water tank for 30min with descaling
agent (such as citric acid) every month before
cleaning it. Do not wipe it with organic solvent
such as gasoline (Remove the filter cover, filter
and concentrated water tank before cleaning
the machine).