Dahlert DT-WP-20, Инструкция по эксплуатации

Страница: 6 / 12

4
5. After supplying power, the product starts to produce water. The hot water, warm water, and
ambient temperature water indicators turn on sequentially. Several minutes later, the water
production is finished, the buzzer beeps once, and the indicators turns out, the water can be
used normally. During this process, it may possibly require feeding and discharging water for
several times.
Hot water Warm water
Ambient temperature
water
5-10 minutes
6. When using for the first time, please clean the internal pipes after producing water.
1.Take out the water tank;
2.Emptying the water tank: Place the water pan under the water inlet, and hold the water output
button to empty the water tank;
3.Repeat for three times, then the machine can be used normally.
3-2.Function description
Taking water
When taking water, click the water temperature button, the corresponding indicator turns on, and
the [output water] button will flash. Then click the [output water] button, the water flows out of the
nozzle, press the button again to stop outputting water, and corresponding indicator turns off.
Hot water
Warm water
Ambient temperature
water
Heating
There are 3 ways to start the heating function:
1. Hold the [hot water] button;
2. Click the [hot water] button, and then click the [output water] button;
3. Click the [warm water] button, and then click the [output water] button.
The indicator flashes during the heating process. After heating, it enters the heat preservation state,
the indicator keep on. Press the [hot water] button again to stop heating, and the corresponding
indicator turns off.
Hot water
3 seconds