Dahlert DT-WP-20, Инструкция по эксплуатации

Страница: 7 / 12

5
When the raw water tank is short of water, the "water shortage" indicator flashes, and no water
can be output at this time. You need to lift the water tank to drain the concentrated water, add tap
water to the raw water tank, and place it on the machine.
Water shortage state of raw water tank
Notes:
Notes:
Do not add water to the raw water tank continuously. After using one tank of water, discharge the
concentrated water once. Otherwise, after 6 minutes of continuous water production, the "water
shortage" indicator will flash, and water cannot be output at this time since the concentrated water
shall be discharged by lifting the water tank.
3-3.Filter configuration
3-4.Replace the filter
The filter shall be replaced by yourself or the work staff designated by our company (Please
purchase the filter from the local dealers, Midea Mall and Midea flagship store).
A small amount of water may possibly flows out during the process of replacing filter, which is
normal.
1. Cut off power supply before replacing the filter.