Dahlert DT-WP-20, Инструкция по эксплуатации

Страница: 10 / 12

6. Product Parameters
For the technical improvement of the product, the following parameters are subject to change
without prior notice, please refer to the nameplate of the product.
The purified water flow rate is tested when the environment temperature 25±2
℃
, and the water
temperature 25± 1
℃
.
DT-WP-20 Model
Rated
Voltage / Frequency
Rated hot water
production
capacity
Rated power
Rated general
purified water flow
rate
Purified water
flow rate
Water inlet
pressure
Working pressure
Applicable water
qualty
Applicable
environment
temperature
Appearance
difference
220V- /50Hz
≥ 90 , 4L/h
430W
1000L
0.2L/min
0.05-0.1MPa
0.45-0.8MPa
Municipal tap water
4-38
White housing
Water treatment process drawing
Municipal tap water →Integrated composite filter (PP cotton, fiber active carbon, nanofiltration
membrane, carbon rod active carbon) →Water output→Waste water
It is normal if the followings occur during use, please set your heart at relaxed to use it:
1. There is slight noise during the process of taking hot water.
2. The water pump will generate slight noise when the water dispenser & purifier is under
purification and filtration.
3. The water output speed of the different water temperatures is not completely the same.
4. When the water temperature is too low, the water purification working time of the machine will
be longer.