Daewoo TAPER 40, Руководство по эксплуатации

Страница: 23 / 83

2. Description
VMCTOPES8D51
1
1
1
1
1
2.2.2.3 Incremental buttons
Please refer to NC instruction for detail information.
2.2.2.4 Program control
Please refer to NC instruction for detail information.
Symbol Description Function Remark
Incremental feed
variable
– Incremental traverse with setted
increment size in parameter
Refer to NC
Instruction
manual
Incremental feed
1
– Incremental traverse with 1 increment
size(
㎛
)
Incremental feed
10
– Incremental traverse with 10 incre-
ment size(
㎛
)
Incremental feed
100
– Incremental traverse with 100 incre-
ment size(
㎛
)
Incremental feed
1000
– Incremental traverse with 1000 incre-
ment size(
㎛
)
Incremental feed
10000
– Incremental traverse with 10000
increment size(
㎛
)
Symbol Description Function Remark
Reset
– The current part is aborted
– Signals from the monitoring function
are cleared.
Single block
– Execution the automatic operation
by single block stop.
Cycle stop – The active part program is halted.
Cycle start
– The selected part program is started
at the current block.
Main OP. devices 2 – 6