6
What to do if you get picture interference when using RF lead
Option 1
If other stations are positioned on or near the current RF OUTPUT CH, the following guide message
appears automatically.
The RF output can be adjusted from 21 to 69, this video is defaulted to RF52. If other
broadcasts are close to RF 52 they may cause picture interference, you can change the
RF output until your television has a noise-free channel for your video.
Change the RF output from 52 using the remote control.
Press
MENU
. Select ‘VCR Set Up’ by pressing
PR-
twice then
OK
.
Select ‘RF Output Set Up’ by pressing
PR-
twice then
OK
.
Change the channel number using buttons
0-9
.
Press
OK
to confirm. Press
MENU
to end.
Option 3
Buy a scart lead from your local electrical shop. Connect the scart lead as shown on page
2, diagram 2.
If you want to change the RF output in the future due to new broadcasting stations or equipment and so on,
press and hold the
OK
button on the remote control until RF 52 is displayed on the front of the video. Then go
to option 2 above.
PLEASE CHANGE THE TV
CH TO 54.
IMPORTANT!
Press
OK
to confirm.
Press
MENU
to end.
Option 2
RF OUTPUT SET
0-9:SET UP (21-69)
OK:CONFIRM MENU:END
CH 52
If there is still picture interference repeat option 2.
RF OUTPUT SET
OK:CONFIRM MENU:END
CURRENT
CH 52
RECOMMENDED CH
54
