9
8
Tuning your video recorder to the television
If you already set the language and country set, you can see the followings.
If you do not see this picture, check that the video is
connected properly.
Press
OK
for ‘Auto Set’ or ‘Auto Search’.
1
3
MENU:END
PLEASE WAIT...
CH 25
Unless you are living in an area with poor reception, ‘Auto
Set’ or ‘ Auto Search’ tunes in all the stations you can
receive in your country .
See page 12, 13 and page 29 if you need to change any of
the automatic settings. You should finish the auto set
before you go to page 12, 13 or page 29.
The clock is also set automatically. If the clock has not
been set, the clock setting screen will appear.
Please see “ Setting time and date” on page 9.
If you want to change the station names, see page 12.
If you want to change the programme locations see page
13.
Press
MENU
to end.
MANUAL SET
PR01 P-01
PR08 P-08
PR02 P-02
PR09 P-09
PR03 P-03
PR10 P-10
PR04 P-04
PR11 P-11
PR05 P-05
PR12 P-12
PR06 P-06
PR13 P-13
PR07 P-07
PR14 ----
PR+/-:SELECT
OK:CONFIRM MENU:END
Important: If you switch the video off at the mains supply overnight, you do not have to
retune the video. Simply press
and then
MENU
on the remote control to restore all the
program settings. See page 9 to set the time and date.
CLOCK SET
0-9:SETUP (HOUR)
/ :CORRECT
OK:CONFIRM MENU:END
TIME - - : - -
DATE - -/- -/- - - -
2
If the ‘CLOCK SET’ display is not already on the screen
press
MENU
.
Choose ‘VCR SET UP’ by pressing
PR-
twice, then
OK
.
Choose ‘CLOCK SET’ then press
OK
.
CLOCK SET
0-9:SETUP (HOUR)
/ :CORRECT
OK:CONFIRM MENU:END
CLOCK SET
0-9:SETUP (HOUR)
/ :CORRECT
OK:CONFIRM MENU:END
TIME - - : - -
DATE - -/- -/- - - -
TIME 11:41
DATE 12/09/2005(MON)
Setting time and date
1
2
Once the ‘CLOCK SET’ display is on the screen, move to the
position you want to change by pressing or .
Use the number buttons
0
to
9
on the remote control to
enter the correct time and date.
Press
OK
to confirm the settings, and press
MENU
to end.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM MENU:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM MENU:END
OSD (On Screen Display) ON & OFF
This VCR is set to “OSD (On Screen Display) ON” mode at the factory, but you can change it to OFF
mode. When a function is changed at the front display or remote control the change will be
displayed on the screen.
Press
MENU
.
Choose “VCR SETUP”
And press
OK
.
Choose “OSD ON/OFF”.
If you want OSD OFF mode, press
PR-
and press
OK
.
OSD characters will not be displayed in the normal picture
at the start of each mode change.
1
2
3
MAIN MENU
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM MENU:END
