Daewoo RCC-740, Руководство по обслуживанию

Страница: 7 / 30

4. Trouble Shooting Guide
☞ CAUTION ! Please surely unpluged power plug before repairing.
TROUBLE CAUSE CHECKING COUNTERMEASURE
Dust box is full with dust Dust Box (See 5-7) Remove the dust
Dust box is installed incorrectly Dust Box (See 5-7) Reinstall dust box
Filter in dust box is clogged with dust Dust Box (See 5-7) Cleaning→drying→using
Exhaust filter is clogged with dust Body (See 5-2) Cleaning→drying→using
Defective motor Motor (See 5-5) Replace the motor
Filter in the body assembly is clogged with dust Motor (See 5-5) Clean the filter
Clogging or tear in hose Hose (See 5-6 ) Remove obstacle or replace the hose
Telescopic pipe is clogged with large dust Remove obstacle
Brush nozzle or hose is clogged with large dust Brush (See 5-8) Remove obstacle
Dust Box (See 5-7) Remove dust
Hose (See 5-6 ) Remove obstacle
Pipe Remove obstacle
Brush (See 5-8 ) Remove obstacle
Breaking in power cord Replace power cord
Bad contacts in cord reel assembly Repair bad contact
Breaking of connections in cord reel assembly Repair Disconnection
Defective terminal connection of PCB in body PCB (See 5-1) Check terminal connection state
Defective PCB PCB (See 5-1) Replace PCB
Defective contact between PCB and motor/cord reel PCB (See 5-1) Repair bad contact
Motor out Motor (See 5-5) Replace Motor
Fuse disconnection Cord reel (See 5-4) Replace fuse
Broken reel sping of cord reel Cord reel (See 5-4) Replace Cord reel
Power cord is interwined Cord reel (See 5-4) Repair interwinement
Abrasion of the roller tire of cord reel Cord reel (See 5-4) Replace tire
Broken lever Cord reel (See 5-4) Replace lever
Lever spring broken away from cord reel bracket Cord reel (See 5-4) Repair lever spring
Bobbin is transformed Cord reel (See 5-4) Replace bobbin
Bracket is transformed Cord reel (See 5-4) Replace bracket
Lever is pushed by handle Cover (See 5-3) Repair handle
Power cord is not
wound up
Brush does not
rotate any direction
Power cord does
not stop at an
arbitraty position
Suction power
is weak
Motor does not stop
even if switch off
Dust full indicator is
on in the body
Vacuum cleaner
does not work
Dust full indicator will be executed when dust
box is filled up with dust or hose is clogged
with obstacle.
Cord reel (See 5-4)
Defective PCB PCB (See 5-1) Replace PCB
Clogged impurites in rotational part Brush (See 5-8) Remove impurites
Be careful when breaking up the cord reel, the reelspring may spring out of the spring cover.
CAUTION
-
6
-