manualshive.com logo in svg

Daewoo KOR-131G0A, Руководство по обслуживанию, Страница: 6 / 49

Поделиться
Скачать
Daewoo KOR-131G0A Скачать руководство пользователя страница 6

5

EXTERNAL VIEW

2. FEATURE DIAGRAM

 

1. DOOR SEAL

Door seal maintains the microwave within the oven cavity and prevents microwave leakage.

2. DOOR HOOK

 

When door is closed, it will automatically lock shut. If door is opened while oven is operating, magnetron tube will 
immediately stop operating.

3. DOOR SCREEN

Allows viewing of food. Microwave cannot pass through perforations in screen.

4. SPATTER SHIELD

Protects the microwave outlet from splashes of cooking foods.

5. OVEN LAMP

Automatically turns on during oven operating.

6. SAFETY INTERLOCK SYSTEM

7. CONTROL PANEL

8. GLASS COOKING TRAY

Made of special heat resistant glass. The tray must always be in proper position before operating. Do not cook food 
directly on the tray.

9. OVEN FRONT PLATE

10. DOOR OPENING BUTTON

  To open the door, push the door opening button. When door is closed, it will automatically lock shut. If door is opened 
  while oven is operating, magentron tube will immediately stop operating.

11. ROLLER GUIDE

  Supports the glass cooking tray.

Содержание KOR-131G0A


















































Отзывы:

Нет отзывов