background image

6

5. CONTROL PANEL 

DISPLAY WINDOW

1. MICROWAVE - indicator, showing microwaving in

progress.

2. DEFROST- indicator, showing defrosting in

progress.

3. GRILL(upper grill heater) - indicator, showing

griling in progress.

4. GRILL(lower grill heater) - indicator, showing

griling in progress.

5. CONVECTION - 

    BARBECUE - 

indicator, showing convectioning in 

progress.(KOC-1B4K0S,1B4K0S10,

1B4K0S20,1B4K5S,1B4K5S10)

indicator(KOC-1B4K0S01,1B4K0S31,

1B4K9SA1)

6. CHILD LOCK - indicator.

7. % - percentage microwave power level indicator.

BUTTONS

8. language - Press to select the language.

9. clock - Use to set clock.

10. less - Use to remove time from cooking.

11. more - Use to add time to cooking.

12. m/w - Press to select microwave power level.

13. combi - Press to select combi cooking mode.

14. auto defrost - Press to select defrost menu.

15. convection - Press to select convection

temperature.

16. grill - Press to select grill.

17. cake - Press to select cake menu.

18. crusty - Press to select crusty menu.

19. auto cook - Press to select auto cook menu.

20. memory - Use to set favorite cooking mode.

(KOC-1B4K0S,1B4K0S10,1B4K0S20,

1B4K5S,1B4K5S10)  

20. 

barbecue - Press to select barbecue mode. 

                          (KOC-1B4K0S01,1B4K0S31,1B4K9SA1)

21. start/speedy cook - Press to start a programme,

also for speedy start (each press adds 30
secondsmicrowave cooking time).

22. stop/clear - Press once to stop a programme, and

twice to cancel a programme.

23. dial knob - Use to set time, weight and quantity.

Содержание KOC-1B4K0S












































Отзывы: