Daewoo KOC-1B4K0S, Руководство по обслуживанию, Страница: 17 / 43

16
12. To remove Rear heater assembly parts.
1) Remove a screw and pull out Cover motor *B .
2) Remove a screw and pull out Cover *B .
3) Pull out the Harness convection-B .
4) Remove four screws and then pull out the Rear heater assembly.
5) Remove a Nut and the pull out the Fan convection and Washer plain .
6) Remove three screws and then separate the Cover heater *B and the lnsulator heater *B .
7) Pull out two Heaters from the Cover Heater *B .
8) Remo two screw and then separate the lnsulator heater *B and Motor shaded pole .
9) Remove the C-Ring and then pull out the Fan from Motor shaft.
10)Reverse the above steps for reassebly.
REF NO. PART CODE PART NAME DESCRIPTION Q TY REMARK
1 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 1
2 3511407300 COVER MOTOR*B SA1D-80 T0.5 1
3 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 2
4 3511407400 COVER*B SA1D-80 T0.5 1
5 3512766900 HARNESS CONVECTION-B KOC-1B0K0S 1
6 3512803800 HEATER MIRACLON 115V 550W 270MM 2
7 3511407700 COVER HEATER*B SA1D-80 T0.5 1
8 7113400814 SCREW TAPPING T1 BIN 4X8 MFNI 1
9 7400504011 WASHER PLAIN PW5-5 BRASS 1
10 3511800700 FAN CONVECTION SA1D-80 T0.5 1
11 7S627W50X1 NUT HEX 6N-1-4 BSNI 1
12 3512766800 HARNESS CONVECTION-A KOC-1B0K0S 1
13 7051400811 SCREW MACHINE PAN 4X8 SW MFZN 2
14 3513302900 INSULATOR HEATER*B SBHG-1 T0.5 1
15 7113400814 SCREW TAPPING T1 BIN 4X8 MFNI 4
16 3963514330 MOTOR SHADED POLE 230V 50HZ MW10CA-TO 1
17 3511800900 FAN PBT 1
18 7402704600 RING-C CR-5 SK5 1
: