9
Hurricane CAT 3 Carpet Washer
Model No. FLR00116
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
2.
Fully unwind the
Mains Cable
(13) and insert the
mains plug into the nearest mains socket and switch
the socket on (if applicable).
3.
Hold the cleaner by the
Handle
(1) and then
step on the
Handle Release Pedal
(11) shown
right and gently lower the
Handle
(1) into the
cleaning position:
4.
Step on the
On/Off Pedal
(12) to operate the Carpet
Cleaner:
5.
Whilst pressing the
Solution Release Trigger
(2) to release the cleaning
solution, pull the cleaner backwards towards you.
6.
Once you have reached the edge of the carpet, release the
Solution Release
Trigger
(2) and then push the cleaner forwards along the same path to remove
the dirty cleaning solution from the carpet.
7.
Repeat the above steps 3 & 4 to clean the rest of the carpet or heavily soiled
areas.
8.
Once the cleaning is complete, step on the
On/Off Pedal
(12) to switch the
cleaner off.
9.
Lift the
Handle
(1) up to the upright position until it locks into place.
10.
To store the cleaner, wrap the
Mains Cable
(13) around the cable storage on the
back of the cleaner.
2
3
4
