11
Hurricane CAT 3 Carpet Washer
Model No. FLR00116
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
D.
Lift up the rubber ‘Quick Spout’
up at the top of the
Dirty Water
Tank
(7) and pour the dirty
water away a shown left and
then thoroughly rinse out with
warm water:
E.
Replace the
Dirty Water Tank
(7) back onto the Carpet
Cleaner.
Cleaning & Maintenance of Your Carpet Cleaner
WARNING!
Always disconnect the carpet cleaner from the mains power
supply before cleaning.
•
Clean outside of the cleaner with a clean damp cloth. Never use harsh or
abrasive cleaners.
•
Do not submerge the cleaner in water or any other liquids.
Cleaning the
Bristle Bar
(9)
F.
After each use, turn the Carpet
Washer upside down and remove the
Bristle Bar
(9) from underneath by
pressing the two catches at the front
and rear of the
Bristle Bar
(9) in the
direction of the arrows and removing
as shown left:
Take care whilst removing the
Bristle Bar
(9) not to lose the connecting pin that fits
between the bar and cleaner:
G.
Wash the
Bristle Bar
(9) clean in warm water and
allow to dry thoroughly before refitting back on to
the Carpet Cleaner.
To refit the bar, press the two catches as shown
above
in ‘F’
and push back into place, ensuring the
connecting pin is inserted into the hole in the
Carpet Washer as shown left:
D
F
Left: Connecting Pin
G
