7
Hurricane CAT 3 Carpet Washer
Model No. FLR00116
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Assembling Your Carpet Cleaner
WARNING!
Ensure that the carpet cleaner is
not connected to the mains supply before
assembly
Attach the
Handle
(1) to the Carpet Cleaner
as shown left with the two Handle
Fixing
Screws
(14) provided using a Crosshead
screwdriver (Not Supplied).
Do not overtighten the screws as this may
permanently damage the threads.
Filling the Solution Tank (5)
1.
Remove the
Solution Tank
(5) by lifting the
Solution Tank Release Catch
(4)
forwards and removing the tank towards you.
2.
Lift the
Clean Water Filling Cap
(3) up and fill
the
Solution Tank
(5) with warm water (max.
40⁰C)
as shown right, ensuring that the water
level is not above the ‘MAX’ mark
(arrowed)
on the side of the tank:
In hard water areas it is strongly
recommended that demineralised water is
used to avoid calcium build up which may
damage the carpet cleaner.
3.
Add carpet cleaning solution to the
Solution Tank
(5) carefully following the
manufacturer’s instructions.
4.
Only use this appliance with an appropriate (Low-Foaming) commercial carpet
cleaning solution such as Daewoo Carpet & Upholstery Shampoo which is
available by contacting Daewoo Customer Services on
0161 831 7879
or email
5.
Using incorrect solutions will cause excessive foaming which may prevent the
appliance from performing correctly and may cause permanent damage to the
appliance.
6.
DO NOT
use solvents or cleaners with strong acidic or alkali formulas or any
14
