Daewoo DWR-WG52S, Руководство по обслуживанию

Страница: 48 / 82

47
R
Dryer Service Notices
No. Service Parts Notices
1 Replacing the
humidity sensor Humidity sensor Be careful of the terminal connection
Be careful of loose attachment
2 Replacing/fixing panel
f assy PCB/BUTTON/
HARNESS Be sure that the panel f assy does not interfere in
the drum after the service
3 Replacing the lifter LIFTER Remove only the plate top to replace the part
4 Replacing roller assy ROLLER Be cautious of the direction of the roller/insertion
of the washer
5 Replacing the terminal
DNQEM
TERMINAL BLOCK Be careful of wiring connection
6 Replacing the heater
Replacing the burner Drying heater
GAS BUNNER Do not use oversized screws.
Be sure of the proper assembly.
(Loosening should be little)
$GECTGHWNVJCVPQQDLGEVGIUETGYUKUFTQRRGF
into the heater when assembling.
Be careful of the direction / insertion of the
connector. Use only standard screws.
7 Replacing the sensor Temp and safety sensor Be careful of the direction / insertion of the
connector. Use only standard screws.
8 Door assembly Door hinge Be careful not to scratch chromium plating when
fastening the screws to fix the door as. A claim is
expected.
9 Disassembly/assembly
of the door as Door as Be careful about the up/downward direction of
FQQTINCUUCPFKPUGTVKQPQHCICUMGV7UGQPN[
standard screws.
10 Disassembly/assembly
f the motor as
Replacing the belt MOTOR AS
BELT Be careful not to nip the finger when assembling
the motor (hold the edge of the motor).
Be careful about the direction of the belt and
insertion of a fan/case fan (incorrect assembly
may cause noise) as well as the connector.
11 Disassembling the drum DRUM
roller of sup r sup f.
before fastening. Do not drop the motor.
Be sure that he drum is accurately put into the