10
FEATURE
When the START/HOLD button is pressed, the residual time (min.) is displayed on the time indicator, and it will be
counted down according to process.
When operation is finished, the TIME INDICATOR will light up
.
1 When the DRAIN MOTOR connected to the power source, the DRAIN MOTOR rotates with 900 r.p.m and revolves
the pulley by gear assembly for reducing.
2 When the pulley is rotated, the pulley winds the wire to open the drain valve.
3 Therefore, rotation of pulley changed to the linear moving of wire.
4 The wire pulls the brake lever of Gear Mechanism Ass’y within 5 seconds.
5 After the wire pulled, gear assembly is separated from motor and condition of pulling is held by operation of the
lever.
6 When the power is turned off, the drain valve is closed because the wire returns to original position.
STRUCTURE
Much lint may be obtained according to the kind of clothes
to be washed and some of the lint may also stick to the
clothes.
To minimize this possibility a lint filter is provided on the
upper part of the tub to filter the wash water as it is
discharged from the water channel. It is good to use the
lint filter during washing.
HOW TO REPLACE LINT FILTER
1 Pull the filter frame upward.
2 Turn the lint filter inside out, and wash the lint off with water.
3 Return the filter as it was, and fix the filter frame to the slot.
Pull
Loosen
Pulley
Lever
Inductive ring
Magnet
Coil of motor
Magnet of motor
Lint Filter
Residual Time Display
Drain Motor
Filter
Содержание DWF-204AY
Страница 29: ...APPENDIX 28 PCB ASS Y Wiring Diagram...
Страница 31: ...30 PARTS DIAGRAM B12 B13...
Страница 32: ...31 PARTS DIAGRAM C13 C14 C15 C01 C02 C03 C04 C05 C07 C06 C09 C10 C11 C12 C08 C13 C14 C15...
Страница 33: ...32 PARTS DIAGRAM D01 D02 D03 D05 D08 D09 D07 D10 D11 D12 D13 D16 D17 D15 D14 D04...