6
INSTALLATION
■
Installation of drain hose
• Never forget to install drain hose before operating your washer.
• Open the packing box, and the drain hose is tied at backside of washer.
• If you use the laundry tub, Top of laundry tub must be at least 60cm high and no higher than 100cm from bottom of washer.
• When installing the drain hose to tub(sink), secure it tightly with a string.
• Proper securing of the drain hose will protect the floor from damage due to water leakage.
• When the drain hose is too long, do not force it back into the washer.
This will cause abnormal noise.
■
Level adjustment
•
The level adjustment of the washing machine prevents exces-
sive noise and vibration.
•
If the floor is uneven, adjust the adjustable leg as the following.
(Do not insert pieces of wood etc. under legs.)
• Please check whether there is any gap between four
adjustable legs and the floor.
• Turn adjustable legs by the spanner in order to adjust the level
of the washing machine.
• Make it sure that there is no swaying of the washing machine
and check that the washing machine is even completely.
(use a spirit level or the diagonal check.)
• After the level adjustment is finished, turn fixing nuts up tightly
so that the washing machine maintains the adjustment.
❈
Diagonal Check
When pushing down the edges of the washing machine top
plate diagonally, the machine should not move up and down
at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top plate diago-
nally, adjust legs again.
leg
leg
Fixing Nut
Содержание DWD-M8011
Страница 17: ...16 EXPLODE VIEW AND PARTS LIST TUB AS ...
Страница 19: ...18 EXPLODE VIEW AND PARTS LIST CABINET AS ...
Страница 30: ...10 WIRING DIAGRAM 29 WIRING DIAGRAM ...