Cam Gear, and F/L Rack Removal
(fig. 22)
1. Remove the cam gear
⑦
form the deck mechanism.
2. Remove the relay lever
⑥
from the main base
⑤
.
3. Remove the F/L rack
⑧
from the deck mechanism.
NOTE :
When reassembling, align the assembly as shown in Fig.
23 & 24.
S/T Main & Sub Brakes Removal
(Fig. 25)
1. Unhook the main brake spring
①
from the T main brake
lever
③
.
2. Disconnect the main brake lever assembly
②
and T
main brake lever
③
from the main base
⑧
.
3. Unhook the s sub brake spring
④
from the main base
and disconnect the s sub brake lever assembly
⑤
from
the main base
⑧
.
4. Unlook the T sub brake spring
⑥
from the main base
and disconnect the T sub brake lever assembly
⑦
from
the main base
⑧
.
Tension Band Assembly Removal
(Fig. 26, 27)
1. Remove the tension spring
②
from the main base
①
(Fig. 26)
2. Turn the deck mechanism upside down (fig. 27) is facing
down (fig. 27)
NOTE :
• After reassembling, adjust the position of the tension pole
as shown in fig. 28.
• Avoid getting grease or oil on the felt section of the band
brake.
15
Fig. 23- L/C Bracket Assembly Alignment
Fig. 25- Main Plate Removal
Fig. 26- Tension Band Assembly Removal (1)
Fig. 24- Cam Gear/F/L Rack Alignment
