Daewoo DV- K584N-SJ, Техническое руководство

Страница: 20 / 123

19
NOTE:
Reassemble the cassette loading mechanism using the reverse
procedures. Confirm that the two (2) bosses on the left side of
the cassette holder are inserted into the groove in the left side of
the top plate. Insert the two (2) bosses on the right side into the
F/L bracket R (Fig. 17).
Replacement of the Drum Assembly/Earth
Bracket
(Fig. 18)
1. Remove three (3) screws (3).
2. Remove the earth bracket (5).
3. Carefully lift the drum assembly (4) from the deck mecha-
nism taking care not to damage or touch the video heads.
NOTE:
After reassembling the assembly, confirm that the tape runs
smoothly and confirm all tape path adjustment procedures in the
"Mechanical Adjustment" section of this service publication.
Reel belt, Loading Rack, Loading Gers, and
S/T Slant Pole Removal
(Fig. 19, 20)
1. Turn the Deck Mechanism updide down and remove the reel
belt.
2. Remove one (1) poly washer
!
and remove the loading rack
(2) by rotating it CCW.
3. Remove loading gear R
#
(black) and loading gear L
$
(white).
4. Remove the S and T slant poles
%
and
^
by pulling them in
the direction of the arrow.
NOTE:
• Take care not to get grease on the guide rollers.
• When reinstalling, realign the gears as shown in Fig. 20.
MECHANICAL DISASSEMBLY (Continued)
Fig. 16- Loading Lever Ass’y Disassembly
Fig. 17 - F/L Brkt R
#
%
$
Fig. 18 - Replacement of the Drum Total Ass'y and Earth
Brkt Ass'y
!
@
#
$
%
^
Fig. 19 - Reel belt, Loading Rack, Loading Gears, S/T slant
pole Removal
ƒR
Screws are different