DTC-410
23
low.
RINGER VOLUME ADJUSTMENT
Slide the
RING (HI/LOW/OFF)
switch at the side of the base to adjust ringer volume high, low or off.
LCD BACKLIGHT FUNCTION
The backlight is turned on when receiving an incoming call, dialing, pressing any key or in music hold mode. It
will fade off if the telephone is left idle for 6 seconds.
Note: If batteries are not loaded, there will be no LCD backlight function.
ONE-TOUCH MEMORY FUNCTION
You can make calls directly by one-touch memory, there are 4 one-touch memories in all.
STORE NUMBER INTO ONE-TOUCH MEMORY
To store a number:
1.
At on-hook or off-hook state, press
STORE
key, the LCD displays
STORE NUMBER
.
2.
Input number by numeric buttons on keypad, maximum 16 digits. During inputting digits, you can press
DEL
button to delete one by one.
3.
Press
M1
,
M2
,
M3
or
M4
key to store the numbers.
MAKE A CALL WITH ONE-TOUCH MEMORY
To make a call with the one-touch memory function:
1.
At on-hook state, press
M1
,
M2
,
M3
or
M4
key,
2.
Then LCD displays the relevant number.
3.
Press
key or pick up handset to dial it out after 3 seconds,
NOTE
: At off-hook state, press
M1
,
M2
,
M3
or
M4
key to dial out directly.
TWO-TOUCH MEMORY FUNCTION
STORE TWO-TOUCH MEMORY NUMBERS:
1.
In on/off-hook state, press
STORE
key, LCD display
STORE NUMBER
.
2.
Input the numbers (0-9,*,# maximum 16 digits), you can press
DEL
key to modify one by one.
3.
Press
STORE
key, press two-touch memory key (3-9,0), LCD display
SAVED
.
DIAL OUT TWO-TOUCH MEMORY NUMBERS:
1.
In on-hook state, press
MEMORY
key then press numerical key (3-9,0). LCD will display relevant numbers,
then press
key or pick up the handset, the numbers will be dialed out automatically.
2.
In off-hook state, press
MEMORY
key then press numerical key (3-9,0), the two-touch memory numbers
will be dialed out directly.
HOLD ON MUSIC
The telephone allows entertain a caller with hold on music during a pause in the conversation.
To activate the hold on music during conversation, press
HOLD
button.
To stop the hold on music and resume the conversation, just press again the
HOLD
button.
TROUBLESHOOTING
?
No voice
+
Check if the handset is on the phone or if the line has terminated.
?
Rusty batteries or leakage
+
Remove the rust or wipe away the leakage.
