15
Installation
Connect the supplied FM/AM antennas for listening to the radio.
• Connect the AM loop antenna to the AM antenna connector.
• Connector the FM wire antenna to the FM antenna connector.
FM wire antenna
(supplied)
AM loop antenna
(supplied)
• To prevent noise pickup, keep the AM loop antenna away from the DVD Receiver and other component.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
14
Speaker system connection
Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the
cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.)
Front speaker
(right)
Front speaker
(left)
Rear speaker
(left surround)
Rear speaker
(right surround)
Center speaker
Subwoofer
If you feel lack of
bass frequency
Connect an active subwoofer to
the WOOFER OUT connector using
a monaural audio cord (not
supplied). When you connect an
active subwoofer, disconnect the
woofer from the WOOFER speaker
connector.
• Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are
reversed, the sound will be distorted and will lack base.
• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on
the speakers.
• Do not disassemble the front cover of supplied speaker.
FM/AM Antenna connection
