12
Progressive Scan Connection
• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD
Recorder’s Progressive Scan output for the highest video resolution possible.
• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.
1
Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder to the corresponding in
jacks on your TV using an optional Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available on
your TV.
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder to the left/right audio in jacks on your
TV using the supplied audio cables.
Choose one of the following TV connections, depending on the capabilities of your equipment.
RF Connection
Connect the ANT OUT (TO TV) jack on the
DVD Recorder to the antenna in jack on your
TV using the supplied 75-ohm RF cable (R).
Scart Connection
1
Plug a scart cable into the scart socket
EURO AV1 at the back of the DVD
Recorder and the corresponding scart
socket at the back of the TV set. (V)
2
Plug a scart cable into the blue scart
socket EURO AV2/DECODER at the back
of the DVD Recorder and the
corresponding scart socket at the back of
the Decoder.
Connecting a TV
Connections
This set doesn’t apply the modulator output.
However, still apply the RF through Output.
ANTENNA
INPUT
Y
Pb
Pr
COMPONENT/PROGRESSIVE VIDEO INPUT
S-VIDEO
INPUT
R
C
V
Rear of DVD Recorder
Rear of TV
DW-T37D2P-SB(GB) 2006.12.27 3:29 PM ˘
` 12 mac001 1200DPI 90LPI