18
Daily Use
Format Selection
AUTO setting :
If picture format signalling data is received, then the most appropriate ZOOM format will be automati-
cally selected. In the absence of this data, the default ZOOM format will be selected(see
page 24, ZOOM AUTO function under FEATURES MENU). Otherwise, the preferred mode of the user can
be forced by repeated pressing of the remote control ZOOM button (A15):
Television Format 17”
The following picture formats are available:
AUTO NORMAL FULL SCREEN ZOOM 14:9 TITLE IN 14:9 ZOOM 16:9 TITLE IN
16:9 AUTO
Television Format 20”
The following picture formats are available:
AUTO WIDE FULL SCREEN ZOOM WATERGLASS AUTO
Remark:
If HD source is received, picture format will automatically set to AUTO.(above various picture
formats are not available)
Menus Language Selection, Child Lock, Clock Setting, Wake Up, Noise Reduction
These functions are available in the Features menu (see description page 24).
CHILD LOCK
This function only allows the TV to be turned on using the remote control. Once the user has set this
CHILD LOCK to ON, it will remain in this condition until the user changes it again.
WAKE UP
It is necessary to have set the clock (either manually or automatically) in order to be able to use this
function. If the clock is not set (--:-- is shown) then the WAKE TIME and WAKE PROG. will not be selecta-
ble. The default setting for WAKE TIME is in the “OFF” position. After each use (the TV turns on according
to the previous setting) the WAKE TIME will be returned to the “OFF” position, conserving always the last
time setting entered ready for re-use.
CLOCK SETTING
The TV will automatically attempt to set the clock when powered on (with the MAIN POWER button). It
takes as reference information embedded in the teletext signal of the channel de
fi
ned by CLOCK PROG.
Therefore, automatic clock setting is only possible if teletext is available on this channel. If no time is
captured automatically (the clock will show - - : - -), then the TV will try again to set the clock whenever
turning on from standby mode. Alternatively, the user can enter the time manually using the CLOCK
function. However, if this is done the clock will not be periodically updated as would happen if the time
is set automatically. We recommend that the user choose (if available) a CLOCK PROG which allows the
time to be updated automatically.
