background image

28

Teletext Format Picture & Sound Control

Doubling character height

Repeatedly pressing the HEIGHT (   ) button (A23) doubles the character 
height in the following order: 
Upper half of the page (UP)   Lower half of the page (DOWN)    Return to 
normal height. 
If the page is in UP or DOWN mode, then normal size is automatically set if : 
- A new page request is made (e.g. CYAN, INDEX or PAGE UP/DOWN). 
- CANCEL mode (A8) function is used. 
- VOLUME menu is activated with the MENU button (A19). 

Note:

 The menu at the base of the screen is always visible

Volume and brightness control in teletext mode

VOLUME (and sound MUTE), BRIGHTNESS controls 
are all possible in teletext. The BRIGHTNESS control 
are dedicated to the teletext display. 
-  Access the VOLUME control by pressing the MENU 

button (A19) in teletext mode. A barograph will 
appear in the lower part of the screen (as in TV 
mode). If MUTE is active a mute icon is also shown. 

-  A second press on the MENU button (A19) will 

access the BRIGHTNESS control. 

-  The active bargraph will timeout after 3-4 seconds (as in TV mode VOLUME control) or by 

pressing on the MENU button (A19) a third time after brightness control 

-  Each control can be adjusted by using the remote control CURSOR RIGHT (A20) / LEFT (A7) buttons.
-  Mute can always be activated by pressing the SOUND MUTE button (A2). 
-  Any change to the VOLUME level will cancel the SOUND MUTE.

Watching tv while page searching

The CANCEL function can be used to make the teletext page transparent, thus 
revealing the TV picture: 
-  To enter cancel mode, press the CANCEL (   ) button (A8) while in teletext 

mode. The TV program will reappear on the screen, while only the teletext 
page number or the cancel icon remains at the top and left corner of the 
screen. 

-  You can enter a new page number in this mode only by using the remote control NUMBER 

0...9 buttons (A3), or with the INDEX (   ) button (A18).

-  If a page has been requested, but has not yet arrived, cancel icon will be displayed until the 

page arrives. Once arrived the page number will be displayed. 

- The teletext page can be made visible again by pressing the CANCEL (   ) button (A8). 
- It should be noted that the TV program cannot be changed while in cancel mode. 
- The CANCEL function is not available in PAT and TAT mode.

Watching tv with teletext subtitles

If the actual teletext page is a news 

fl

ash or subtitle page, then most of the TV picture 

becomes visible. In this situation the ZOOM format chosen in TV mode is reactivated, where 
possible. 
This is particularly useful while watching a program with the teletext subtitles. Only formats 
which do not allow the full height of the TV picture to be seen are not possible in teletext 

Содержание DLP-17D3
































Отзывы: