14
Start Up
Language Menu
The very
fi
rst time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its
purpose is to enable you to select the language that will be
used for all the OSD (On Screen Display) menus. The user must enter a choice of language
before proceeding further.
The language entered at this stage can still be modi
fi
ed at any later time, by entering the
LANGUAGE menu (accessed from the FEATURES menu: see later
section under MENU DESCRIPTION).
The descriptions used in the menu are those of the country code (e.g. GB = English, NL = Hol-
land etc).
LANGUAGE
BG CZ D DK
E
F
FIN
GB
GR
H
I
N
NL
P
PL
RO RUS S
Selection is made by use of the remote control CURSOR UP (A6) / CURSOR DOWN (A21) keys
and CURSOR RIGHT (A20) / LEFT (A7) keys.
Once you are satis
fi
ed with your selection, push the OK button (A18) to con
fi
rm your choice.
The choice will brie
fl
y highlight in red, after which the menu will disappear.
Note:
The languages shown are subject to modi
fi
cation without prior notice.
Automatic Tuning
Automatic Tuning System
If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack
(C1), you must power on the demodulator and tune
Sky News before starting ATSS .
ATSS = Automatic Tuning and Sorting System. To start the ATSS function:
- Select “ATSS” function.
- Adjust to the required country.
- Press and hold the OK button (A18) to start the automatic tuning.
The ATSS function has started when the phrase “Please Wait !” appears (in red characters ) in
the help instructions box, below the Install menu. At this point release the OK button.
When the ATSS function is
fi
nished, the stored programs are displayed on screen using Edit
menu presentation (to Exit tuning before automatic tuning is
fi
nished, press the remote con-
trol MENU button (A19) ).
Position Position
Previous Confirm
