• Excess food residues, oil and liquids are collected in the bottom of the frying
basket. They must be removed immediately after use, so they do not remain
until the device is next used.
• Switch OFF the device if you are not going to continue using it and remove the
plug from the power socket.
4) CLEANING AND MAINTENANCE
• Clean the frying basket and device after use.
• Remove the plug E from the power socket and allow the device to fully cool
down (± 30 minutes).
• Never immerse the device in water or any other liquid.
• Clean the device after each use.
• Clean the casing and insides with a damp cloth and perhaps a bit of v up
liquid.
• First wipe the fryer and basket with a soft cloth or kitchen towel; then clean
with a plastic washing-up brush in warm water and washing-up liquid.
• Never use aggressive or abrasive cleaning materials, a scouring sponge or
steel wool; these damages the device, and will scratch and damage the non-
stick materials.
• Dry the basket, fryer and base thoroughly.
• Re-assemble the device so the basket is back inside the device.
• DO NOT store any metal accessories inside the basket, you will damage the
non-stick coating.
• Store the device in a dry place.
• • Only the basket and crisp plate may be washed in the dishwasher,
however for optimum service life of the non-stick layers and to avoid
possible discoloration of the materials, we recommend to hand wash these
parts in warm soapy water.
If the non-stick coating has been damaged by abrasion with the accessories,
do not wash in the dishwasher as this will only exacerbate the problem. can be
washed in the dishwasher.