Electricity and heat
• Before use, check that the mains voltage is the same as the mains voltage
stated on the rating plate of the device.
• Make sure your hands are dry before touching the device, power cord or
plug.
• Plug the power plug into an electrical outlet with earthing that is easily
accessible at all times.
• WARNING!
Never cover the power plug or cable with cloths, curtains
or any other material to prevent overheating and potential fire hazards
.
• Make sure that the device and power cable do not come into contact with
heat sources, like a naked flame or hot hob.
• The device must be able to dispel its heat in order to prevent the risk of fire.
Make sure there is sufficient free space around the device (at least 15 cm from
all sides) and do not place the device in contact with combustible materials
and/or on or near combustible materials.
• WARNING!
The device and/or the air inlet and/or air outlet must not
be covered, in order to prevent overheating and potential fire hazards.
• Regularly check the power cord for damage.
• Never use the device if the power cord shows signs of damage, if the device
has fallen on the ground or shows any other signs of damage.
• Switch OFF the device and remove the power plug if you discover any
problems or faults during use, find any signs of damage, are not using the
device or are cleaning it.
• Make sure the power cord cannot be trodden on or pinched.
• Do not allow the power cord to hang over sharp edges and keep it away from
hot objects and naked flames.
• When plugging in the power plug, make sure people cannot pull it out or trip
over it accidentally.
