5.6.1 Flight record basic application
The
is the function which checks to occur fail condition sometimes.This
function is very useful to search fail of vehicle cause of using analysis of record data.
5.6.2 function
To select a record item, press the
F1 key.
When user presses the
F1
key, the “RECORD” mark is displayed as
shown on the right. If user wants to can-
cel record selection then press F1 key
once more.
Maximum selection items are 8
items.
5.6.3 function
The
is the function which
records the selected sensor data by time
interval. If user presses the
F2 key then display as shown on the
right.
User must input car number, test date
and Memory number by means of using
up, down, right, left, (
,
,
,
)
keys.
When user input completely, press the
key.
Then diagnosis code will be read before
recording.
And diagnosis fault numbers are dis-
played as shown on the right.
And then press the
key to
start recording.
User can finish the recording to press the
F3 key.
STOP
ENTER
YES
ENTER
RECORD
RECORD
RECORD
SELECT
SELECT
SELECT
FLIGHT RECORD
- 148 -
FLIGHT RECORD
01 ENGINE RPM........................ RECORD
05 WATER TEMP.SENSOR....... RECORD
06 RACK SENSOR OFFSET......RECORD
07 PRESTROKE OFFSET.......... RECORD
03 PRESTROKE TARGET.......................V
04 PRESTROKE ACTUAL....................... V
08 MEMORY CLEAR SWITCH........... OFF
09 ENGINE START SWITCH.............. OFF
TIME INTERVAL : sec
SELECT RECORD TIME OUTPUT GRAPH PRINT
02 FUEL RACK SENSOR........................V
FLIGHT RECORD
01 ENGINE RPM........................ RECORD
05 WATER TEMP.SENSOR....... RECORD
06 RACK SENSOR OFFSET......RECORD
07 PRESTROKE OFFSET.......... RECORD
RECORDING. STEP : 00001
STOP
FLIGHT RECORD
CAR N0.
: 1 2 3 4 5 6
DATE
: 9 6 / 6 /1 0
MEMORY No.(0~9)
: 0
YES NO
TIME INTERVAL : sec
SELF-DIAGNOSIS DATA
DIAGNOSIS code reading now.
SELF-DIAGNOSIS DATA
Diagnosis fault : 03 EA
