Daewoo DCSB-87N, Руководство пользователя

Страница: 30 / 30

57
HELP
56
DVD Audio output standards
S
PECIFICATIONS
Power requirement AC 120V, 60Hz
Power consumption 24W (supplementary 4W)
Weight 9.9 lbs (4.5kg)
Dimensions (WxHxD) 17.1" x 3.7" x 10.0" (435mm x 93mm x 255mm)
Operating temperature 41°F~95°F (5°C~35°C)
Installation conditions Horizontal / Relative humidity under 80%
Channel coverage VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125
Signal type NTSC COLOR
Antenna Input/output U/V-mixed: 75
Ω
unbalanced
VIDEO input 1.0 Vp-p unbalanced, RCA JACK
AUDIO input -8.8dBm, RCA JACK
VHF output 3 or 4 CH
VIDEO output DVD/VCR VIDEO output terminal, 1.0 Vp-p unbalanced, RCA JACK
DVD S-VIDEO output (75
Ω
In load Y: 1.0Vp-p, C:0.286Vp-p)
COMPONENT output (75
Ω
In load Y: 1.0Vp-p, Pb:0.7Vp-p, Pr:0.7Vp-p)
AUDIO output DVD/VCR Audio output terminal (2 kinds): -8.8dBm(VCR), 2.0Vrms(DVD), RCA JACK
DVD Analogue AUDIO output (2 CH): 2.0Vrms
Digital audio output (COAXIAL)
Playable tapes Very high dense tapes with VHS marks
Playable discs DVD, VIDEO-CD, CD (12mm), CD (8mm), MP3, CD-R, CD-RW
Tape speed SP: 33.35mm/s, SLP: 11.12mm/s
Playtime SP: 2hrs, SLP: 6hrs (use of T-120 tape)
Clock display 12 hrs AM/PM
Timer Recording 8 programs a year
VIDEO S/N (VCR) Over 45dB(Standard recording)
Resolution VCR Over 220 lines (Standard recording)
DVD Over 500 lines (DVD Disc PLAY)
AUDIO VCR Over 69dB (Hi-Fi), over 40dB (Mono)
DVD 90dB
AUDIO dynamic range 90dB
Disc type
DVD VIDEO-CD CD
Analogue Audio output 48/96KHz sampling 44.1KHz sampling 44.1KHz sampling
Digital Audio output 48KHz sampling 44.1KHz sampling 44.1KHz sampling
Output
Checks Symptom
T
ROUBLESHOOTING
(VCR)
• A screen in Pause mode is shaking
or slow playback is not clear.
• The unit will not record a TV
program.
• When [REC] is pressed, the
videotape is immediately ejected.
• Timer recording from Cable TV
does not work.
• In spite of pressing [CH+/-], a
channel can not be set.
• Screen is distorted while playing a
copy of a tape.
• Remote control does not work.
• [REW] and [FF] Buttons on remote
control do not work.
• VISS index search does not work.
• Cable broadcasting can not be
selected.
➤
Try using a head-cleaner.
➤
Try using the [T/–] buttons.
➤
Check whether the desired channel is visible on the screen. If
not, press [TV VIEW] to view the TV.
➤
Check whether the timer recording settings are right.
➤
Are RF cables connected to the antenna connection correctly?
➤
Does a channel number appear on the display?
➤
Check the record safety tab on the videotape.
➤
Is the RF cable connected to the "ANT.IN" terminal?
➤
Make sure the clock is set correctly.
➤
Does the display show “
” (Ready for timer recording)?
➤
Make sure the timer recording settings are right.
➤
Check the record safety tab on the videotape.
➤
Was the cable data output code set correctly?
➤
Is the cable box setup and output channel set correctly? Refer
to its user manual for instructions.
➤
Did you enter a password? (Please cancel it.)
➤
Did you turn off your player? (Please turn it on.)
➤
The selected channel cannot be stored.
➤
Please check your channel settings or press a number button.
➤
Some rental tapes or discs are set to prevent copying in
manufacturing. These tapes cannot be duplicated in good
condition.
➤
Battery may be weak or dead.
➤
Make sure you are within 23 feet (7 meters) of the unit, and
that there are no obstacles between the remote and the front
panel.
➤
If a videotape is completely rewound, “VISS REW” and “REW”
do not work.
➤
If a videotape has been played completely the end, “FF”, “VISS
FF”, “PLAY” and “REC” do not work.
➤
Are you playing a tape that was not recorded in this recorder?
➤
You may have started recording while the VCR was paused.
Please start recording from Stop mode.
➤
Select “CABLE” not “NETWORK” in the “CHANNEL SETTING”
menu.