2. IPHONE:
In
TUNER
status
,
press
FUNCTION
key to switch over to IPHONE status.
Then insert IPHONE
/
IPOD
unit
to
IPOD port and start to play IPHONE/IPOD music. (After the main unit is connected to power supply, you can
charge the IPOD/IPHONE in any state).
Pause Function:
In IPHONE/IPOD Play or Pause status, press key once to pause playing. (Note: In
IPHONE/IPOD Play or Pause status, LCD
won
'
t display , and they only display on LCD of IPHONE/IPOD).
Up and Down Music Selection Function:
In IPHONE/IPOD play or pause status, press / to call
out Previous Music/ Next Music.
Forward & Reward Function:
In IPHONE/IPOD Play or Pause status, press / key for a longer time
to call out Forward & Reward Function.
IPHONE Incoming Caller Display Function:
When
there
is
an
incoming
call
as
IPHONE
is
playing
music
,
this
unit
will
automatically
switch
over
to
caller
ring
tone
and
stop
playing
music
.
3. AUX:
In IPHONE status, press
FUNCTION
key to switch over to AUX status, just insert the external sound source
like MP3/CD, etc. into AUX port on the back of unit and start to enjoy the music inputted by AUX (please adjust the
volume of external sound source to the medium level and put it in PLAY status).
Volume Adjustment:
Volume may be tuned up or down between 00 and 30.
Memory
Function
:
Open the battery door on the back of unit and load Four AA
batteries into the little
battery holder according to the positive and negative polarities.
NOTE:
The
battery
is
only
for
the
backup
of
the
clock
and
alarm
function
.
Clock Settings:
In Standby status,
press
MEM/SET
key for a longer time to enter into Clock Settings
status
,
then
the
clock
will
be
displayed
and numbers on LCD light will flash. HOUR figures on LCD start to flash, you can
press Previous Music/ Next Music key to adjust the hour
;
press
MEM/SET
key
again
,
HOUR
figures
on
LCD
will
be
displayed
stably
and
MINUTE
figures
start
to
flash
,
you
can
press and keys to adjust the minute and finally press
MEM
/
SET
key once to confirm the settings and exit from the clock status.
Alarm Clock Settings:
Press
POWER
key to power off and enter into standby status, press
SLEEP/AL
key
for
a
longer
time
,
and
HOUR
figures
on
LCD
will
flash
;
then
Previous
Music/Next
Music
key
to
adjust
the
HOUR
,
press
SLEEP/AL
key once and HOUR figures on LCD will be displayed stably and MINUTE figures start to flash, you
can press
Previous Music/ Next Music
key to adjust the minute and finally press
SLEEP
/
AL
key
once
and
the
alarm
clock
mode
starts
to
flash
,
press
and
keys to set up the alarm clock mode as one of ring tone, radio, IPOD/
IPHONE modes and finally press
SLEEP
/
AL
key
to
complete
the
settings
.
Snooze function:
After the alarm clock has rung, press
SNOOZE
key to activate the snooze function.The
alarm ring will pause and will ring alarm nine minutes later. You can then press
POWER
key to stop the alarm bell and
not resume it.
Sleep Settings:
In the play/ pause
/
stop
status
of
arbitrary
function
,
press
SLEEP
key
shortly
on
the
unit
to
set
the
sleep
time
as
SLEEP120 / SLEEP90 / SLEEP60 / SLEEP30 / SLEEP15 / SLEEPOFF
as
you
desire
.
17
16
EN
EN
