Daewoo D35S-2, Руководство по эксплуатации и техническому обслуживанию

Страница: 24 / 172

Safety Section
-22-
Lift Truck Stability Base
For the lift truck to be stable (not tip over forward or to
the side), the CG must stay within the area of the lift
truck stability base - a triangular area between the front
wheels and the pivot of the steer wheels. If the CG
moves forward of the front axle, the lift truck will tip
forward. If the CG moves outside of the line on either
side of the stability base, the lift truck will tip to the side.
WARNING
Dynamic forces (braking, acceleration, turning) also
affect stability and can produce tipover even when
the CG is within the stability triangle.
Capacity Load (Weight and Load Center)
The capacity load of the lift truck is shown on the
capacity/nameplate riveted to the truck. It is determined
by the weight and load center. The load center is
determined by the location of the CG of the load.
The load center shown on the nameplate is the
horizontal distance from the front face of the forks, or the
load face of an attachment, to the CG of the load.
The location of the CG in the vertical direction is the
same as the horizontal dimension.
Remember that, unless otherwise indicated, the
capacity load shown on the nameplate is for a standard
lift truck with standard backrest, forks and mast, and
having no special-purpose attachment. In addition, the
capacity load assumes that the load center is no further
from the top of the forks than it is from the face of the
backrest. If these conditions do not exist, the operator
may have to reduce the safe operating load because
the truck stability may be reduced. The lift truck should
not be operated if its capacity/nameplate does not
indicate capacity load.
NOTE: If the load is not uniform, the heaviest por-tion
should be placed closer to the backrest and
centered on the forks.
NOTICE
1. Capacity/Nameplates originally attached to
forklifts sold by DOOSAN shall not be
removed, altered or replaced without
DOOSAN 's approval.
2. DOOSAN assumes no responsibility for lift
trucks placed in service without a valid
DOOSAN Nameplate.
3. If necessary to change your specification,
contact your DOOSAN lift truck dealer.