- P rocessor Serial Number
C o n t rols detection of processor Serial Number.
(Note : This option would show only if there is pentium
Ⅲ
p rocessor in your
s y s t e m . )
-Installed O/S
Select the operating system installed on your system which you will use most
c o m m o n l y.
(Note : An incorrecting setting can cause some operating systems to display
unexpected behavior. )
-Reset Configuration Data
To reset PnP data, set the value to ‘Yes’. ‘Yes’ erase all configuration data in
ESCD, which stores the configuration settings for non-PnP plug-in devices.
Select ‘Yes’ when re q u i red to re s t o re the manufacture’s defaults.
-PS/2 Mouse
This is to ‘Enable’ or to ‘Disable’ PS/2 Mouse functions.
‘Auto Detect’ will enable the PS/2 mouse only if pre s e n t .
- S e c u red Setup Configurations
‘ Yes’ prevents the Operaing System from overriding selections you have made
in setup.
- L a rge Disk Access Mode
Select ‘DOS’ if you have DOS.
Select ‘Other’if you have another operating system such as UNIX.
A large disk is one that has more than 1024 cylinders, more than 16 heads, or
m o re than 63 tracks per sector.
-Local Bus IDE adapter
Enable the integrated local bus IDE adapter.
Specifies an option from below.
U s e r ’ s M a n u a l
3 0
C B 6 5 6 M - W E
CB656M-WE(2) 2000.10.17 3:55 PM 페이지30
