• Disabled : Disable the Local Bus IDE adapter.
• Primary : Use only the primary Local Bus IDE.
• Secondary : Use only the Secondary Local Bus IDE.
• Both : Use both Local Bus IDE adapters.
- S p read Spectru m
When this item is Enabled, the EMI noise can be extremely minimized.
-I/O Device Configuration.
This item allows you to configure I/O device as following.
• Serial port A/ Serial port B : Assign a port address to each serial port.
• Parallel Port : Assign a port address to the parallel port.
• Floopy disk Controller : Enable/Disable the Floopy disk contro l l e r.
• MIDI port : Configure MIDI port.
• Game port : Configure Game port.
-Advanced Chipset Contro l
• Video boot type : This item is to select whether the onboard video cartro l l e r
as the boot display device or not.
If you want to disable onboard video contro l l e r, Selsct “Disable Onboard
Vi d e o ” .
Then no system memory will be allocated for video.
• Enable memory Hole : If enabled, turn system RAM off to free address space
for use with an option card .
Either a 16KB conventional CD hole, starting at 880KB(DC000h), or a 1MB
extended memory gap, starting at 15MB, will be created in system RAM.
• Frequently Ratio : Select the internal frequency multiplier of the CPU.
3. Security Setup Menu
Use this menu to set User and Supervisor Password and Backup and Vi ru s
check re m i n d e r.
Selecting “Security” from the Menu Bar displays the Security menu, which
looks like this :
U s e r ’ s M a n u a l
3 1
C B 6 5 6 M - W E
CB656M-WE(2) 2000.10.17 3:55 PM 페이지31
