The files for Windows 95 are designed to work solely with Windows 95 (all
versions). The files for Windows 98 are designed to work solely with
Windows 98.
1 . I N S TALLING THE INF FILES From Driver CD
1. Check the System Requirements. Windows 95 or Windows 98 must be fully
installed and running on the system prior to running this software .
2. Close any running applications. You may experience some difficulties if you
don’t do this.
3. Insert the CD-ROM into the drive and enter the “inf” dire c t o r y.
4. Run the InstallShield installation program, SETUP. E X E .
5. You will be prompted to agree to the license agreement. If you do not
a g ree, the Installer will exit prior to extracting any files.
6. The INF files will be copied to the target directory C:\Pro g r a m
Files\Intel\IntelINF by default. If desired, change the target directory by
selecting ‘Browse.’ This directory will henceforth be re f e r red to as <INF
Installation Dire c t o r y >
7. The INF files are now contained within two subdirectories under the
<INF Installation Directory>: \Win98 and \Wi n 9 5 .
2 . I N S TALLING THE INF UPDATE Utility
1. Check the System Requirements. Windows 95 or Windows 98 must be fully
installed and running on the system prior to running this software .
U s e r ’ s M a n u a l
2 0
C B 6 5 6 M - W E
CB656M-WE(2) 2000.10.17 3:54 PM 페이지20
