Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363.
If the plug has to be removed, it should be cut off and carefully
disposed of immediately. To avoid a possible shock hazard, do
not insert the discarded plug into a mains socket.
Fitting a new plug
The mains lead must be connected as shown below. The wires
are coloured with the following code - Brown wire = Live (L), Blue
wire = Neutral (N), Green & Yellow = Earth (E).
Important information
The Blue wire must be connected to the terminal marked N or
coloured Black.
The Brown wire must be connected to the terminal marked L or
coloured Red.
The Green & Yellow wire must be connected to the terminal
marked E or coloured Green.
Check that there are no cut or stray strands of wire inside the
plug.
Use a 13 Amp BS 1362 fuse, only use BSI or ASTA approved
fuses.
If you are in any way unsure which plug or fuse to use, always
refer to a qualified electrician.
After replacing or changing a fuse on a moulded plug, the
cover must be refitted to the plug; the appliance must not be
used without a fuse cover.
Connect
Green &
Yellow to
Earth (E)
Connect
Brown to
Live (L)
Ensure the outer
sheath of the mains
lead is securely held
by the cable clamp
Connect Blue to
Neutral (N)
