Vehicle Systems
Disassembly & Assembly
2.
Put steering column (15) in position in the support
assembly. Connect steering gear (16) to column
(15), and install four bolts (14) that hold the steer-
ing gear and column together. Tighten the bolt to a
torque of 15 ~ 20 N•m.
3.
Connect hose (13) to the steering gear. Put direc-
tional switch (11) in position on the steering col-
umn. Position clamp (10), and install bolts.
4.
Connect all kinds of connector (9).
5.
Connect wires (8) to the ignition switch. Connect
the four steering gear hoses to the steering gear.
6.
Put the cover and instrument group assembly in
position over the steering column. Connect two
wiring harness connectors (7). Connect four con-
nectors (6) to the light switch (if equipped).
7.
Put front cover (2) in position on the support
assembly. Install bolts (1).
8.
Put top cover and instrument group assembly (4)
in position on the top of the support assembly.
Install bolts (3).
End By:
a.
Install steering wheel.
58
IDCD312S
IDCD317S
4
1
2
3
8
9
11
10
13
