DAEWOO ELECTRONICS DTA-14V1, Инструкция по эксплуатации

Страница: 15 / 70

13
Fine Tuning
If you are unable to get a good picture or sound
because of a poor broadcasting signal, it is possible to
fine tune a signal.
Select channel frequency ("FREQ.") function.
Press and release the remote control CURSOR
RIGHT/LEFT buttons to fine tune a signal.
Enter station name
Select "NAME" function.
Use the CURSOR RIGHT/LEFT buttons to select the
character (letter) you want to modify.
To modify this letter press the CURSOR UP/DOWN
buttons until the desired letter is displayed.
Store programme in memory
Select "STORE TO" function
Adjust the programme number you want to store and
confirm by pressing the remote control "NORMAL/OK"
button.
Remarks: This function can be also used if you want to
copy a programme already memorized to
another programme number.
You can call up the MENU without the remote control
unit. You can enter the MENU directly by pressing the
MENU button. If you press the MENU button over 1
sec, the MENU will be displayed on the screen. : If you
press the MENU button less than 1 sec, the screen will
be converted to AV mode.
Move the cursor to the SUB MENU you want by using
the PR UP/DOWN buttons and press the (VOL UP)
button, then the SUB MENU will be displayed on the
screen. When the SUB MENU is displayed on the
screen you can set it by using the PR UP/DOWN or the
VOL UP/DOWN buttons. Press the MENU button to
return to the previous Menu.
At the EDIT mode, you can’t use the MOVE function
and DELETE function
Remarks: This function can’t be AUTO SETUP.
MANUAL CHANNEL SETTINGS
MANUAL CHANNEL SETTINGS
AUDIO VIDEO PR
MENU